|
Parcel
Parcel Van Dual-Wheel Standard Specifications
Single-Wheel Mini Standard Specifications
Photo Gallery |
 |
Parcel Van Dual-Wheel Standard Specifications
Body Lengths: 12', 14', 15', 16'
Body Heights: 79", 85", 91"
Subframe: Ladder-style design with galvanized steel Z crossmembers on 16" C/L mechanically fastened to galvanized steel channel longrails.
Floor Type: 3/4" multi-laminate hardwood floor panels with flush entry galvanized steel threshold and drain trough.
Side Walls: Pre-painted white aluminum side panels fastened to high strength galvanized steel Z posts.
Front Wall: Sliding access door in cab allows easy access to cargo compartment. 3/8" fiberglass reinforced plywood with white gel coat exterior. Panel extends below cab floor.
Side Liner: 3/8" plywood full height.
Roof Assembly: .032" aluminum crowned tension installed with low profile anti-snag roof bows on 24" centers. Three-piece aluminum front roof radius with Poly-Tuff corner caps.
Lighting: All exterior and interior lights and reflectors comply with FMVSS 108 specifications. Three light cluster front of body and sealed wire harness.
Bumper: ICC underride with pooch anti-slip surface step.
Rear Door: Plastic covered rollup rear door.
Rear Frame: High-strength, galvannealed steel with built-in rain deflector and clearance light protector, curbside grab handle. Pre-painted in Imron white.
|
Options
- Add on skirting
- Aluminum diamond plate floor
- Attic over cab
- Curbside door at a standard location
- Interior lighting
- 1-1/8" laminated hardwood floor
- FRP side panel construction
- Galvanized Z posts on 16" centers
- LED clearance lights
- LED recessed taillights in corner posts
- Low mount steel wheelboxes
- Overhead Maximizer side door with recessed stepwell (curbside)
- Paint body and cab
- Pre-painted aluminum panels
- Polyurethane coating on plywood liner
- Recessed lights in corner post
- Roadside grab handle
- Shelves
- Stainless steel rear frame
- Stainless steel front radius
- Solid front bulkhead (no access door)
- Tie rings
- Translucent roof
- 2 panel full opening rear doors
- HA-400 walkramp 10', 12', & 14' length
- 12 GA. galvanized steel scuff plate - sides
- 10-1/2" Apitong scuff - sides
- 4 rows of Apitong slats evenly spaced - sides (replaces plywood liner)
- 3" x 12" rubber bumpers
- 1 row of series "E" track surface mounted each side at 40" C/L to floor (replaces tie rings)
- Inside door lock with exterior handle for 2 panel rear door
- Rear crossview mirrors
- **Many other options available. For more information contact your local Morgan representative or Authorized Morgan Distributor
|
|
Dimensional Data
| Aluminum Sheet & Post |
Rear Door Opening |
| Model |
Outside
Width |
Inside
Width |
Outside
Height |
Inside
Height |
Width |
Height |
| PVSD 79 |
96" |
92-3/8" |
85-3/8" |
79-1/8" |
88" |
73-1/4" |
| PVSD 85 |
96" |
92-3/8" |
91-3/8" |
85-1/8" |
88" |
79-1/4" |
| PVSD 91 |
96" |
92-3/8" |
97-3/8" |
91-1/8" |
88" |
85-1/4" |
| Notes: |
A. Outside height dimension includes roof crown, but does not include body longitudinals.
B. Overhead rear doors protrude into top of door opening 1" to 1-1/2" when in the up position. |
| FRP (Fiber Reinforced Plywood) |
Rear Door Opening |
| Model |
Outside
Width |
Inside
Width |
Outside
Height |
Inside
Height |
Width |
Height |
| PVSD 79 |
96" |
94-3/4" |
85-3/8" |
79-1/8" |
88" |
73-1/4" |
| PVSD 85 |
96" |
94-3/4" |
91-3/8" |
85-1/8" |
88" |
79-1/4" |
| PVSD 91 |
96" |
94-3/4" |
97-3/8" |
91-1/8" |
88" |
85-1/4" |
Body Length
| Aluminum Sheet & Post/FRP |
| Body Length |
12' |
14' |
15' |
16' |
| Outside |
12'5-5/8" |
14'5-5/8" |
15'5-5/8" |
16'5-5/8" |
| Inside |
12'1" |
14'1" |
15'1" |
16'1" |
| Notes: |
A. Inside length is based on roll-up door and FRP front panel; add 1-1/2" for swing doors.
B. Rear light protector extends beyond rear frame 2-1/4." Add this dimension if body does not have a dock extension. |
Calculated Weight (lbs.)
| Model |
12' |
14' |
15' |
16' |
| PVSD 79 |
1618 |
1785 |
1851 |
1930 |
| PVSD 85 |
1671 |
1841 |
1909 |
1990 |
| PVSD 91 |
1724 |
1897 |
1967 |
2050 |
| PVFD 79 |
1638 |
1820 |
1894 |
1980 |
| PVFD 85 |
1691 |
1876 |
1952 |
2040 |
| PVFD 91 |
1744 |
1932 |
2004 |
2100 |
|
|
Single-Wheel Mini Standard Specifications
Body Lengths: 10', 12'
Body Height: 72" , 78"
Subframe: 1-11/16" hat section steel crosmembers welded to 1/4" flat steel long-sills
Floor Type: 5/8" multi-ply floor panels
Side Walls: 3/8" Gelcoat FRP side panels
Front Wall: Solid front bulkhead - 3/8" fiberglass reinforced plywood with white gel coat exterior
Roof Assembly: .032" aluminum crowned tension installed with anti-snag roof bows on 28" centers
Lighting: All exterior and interior lights and reflectors comply with FMVSS 108 specifications
Bumper: Full width easy access bumper with anti-slip surface step platform
Rear Door: Whiting plastic covered rollup rear door
Rear Frame: High-strength, galvannealed steel with built-in rain deflector and light protector, curbside grab handle - Pre-painted in Imron white
|
Options
- Dome light
- LED lights
- LED recessed taillights in corner posts
- Paint body and cab
- Roadside grab handle
- Shelves
- Stainless steel rear frame
- Translucent roof
- 2 panel full opening rear doors
- 4 rows of Apitong slats
- Inside door lock with exterior handle for 2 panel rear door
- Rear crossview mirror
- Access door in cab
- **Many other options available. For more information contact your local Morgan representative or Authorized Morgan Distributor
|
|
Dimensional Data
| FRP (Fiber Reinforced Plywood) |
Rear Door Opening |
| Model |
Outside
Width |
Inside
Width |
Outside
Height |
Inside
Height |
Width |
Height |
| PVFD 72 |
79-1/2" |
78-3/8" * |
86-9/16" |
72-7/16" |
71-1/2" |
66-7/8" |
| PVFD 78 |
79-1/2" |
78-3/8" * |
92-9/16" |
78-7/16" |
71-1/2" |
72-7/8" |
| *Panel to panel |
Body Length
| Body Length |
10' |
12' |
| Outside |
10'6-1/2" |
12'6-1/2" |
| Inside |
10'1-3/4" |
12'1-3/4" |
|
|
Photo Gallery
|
Copyright © 2008 Signature Equipment
All rights reserved.
This website is designed and maintained by Jasar Web Solutions, LLC
|
;)
;)
;)
;)
;)
;)
;)
;)